Universal Smart TLP-2000 Charger for Li-Ion/Polymer battery Pack (3.7V - 14.8V 1-4 cells) with Lipo Pack Balancer

Buy It from All-Battery.com

'Smart universal charger for Li-Ion and polymer Li-ion battery packwith capacity > 500mAh 4 Voltage selections at 3.6V, 7.2V, 10.8V and 14.4V Charges pack made of 1 to 4 cellsUniversal 100V - 240V AC input for worldwide powerusage 500 mA constant charging current.Automatic charging stop when battery packis fully charged ,or when each cell 's voltage reaches 4.2V peakLED indicationRedmeans '' In Charging '' and Greenmeans '' Full '' or ''open circuits ''With Tamiya Conncetor Weight4.5 ozDimension1.5'' x 1'' x 4''Operation Select right voltage level for your pack. For 3.6/3.7V 1-cell pack, set switch button 4.2 position on the chargerFor 7.2/7.4V 2-cell pack, set switch button 8.4 position on the chargerFor 10.8/11.1V 3-cell pack, set switch button 12.6 position on the chargerFor 14.4/14.8V 4-cell pack, set switch button 16.8 position on the chargerWarningUse special caution when working with Li-ion / Li-polymer cells and packs, they are very sensitive to charging characteristics and may explode if mishandled. Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use. Put the batteries in fire-proofenvironment in chargingNever leave batteries unattended when chargingDo not put batteries on wood surface or carpet when chargingWe are not responsible for any damage caused by misusing or mishandling of Li-Ion / Li-Polymer batteries in charging We are not responsible for damage caused by other Li-ion batteries not supplied from us Do not make any changes to the charger, charger accessories or connectors, as this might cause electrical shortage, fire or over-heating during charging. We are not liable for the product if any changes are made to the charger, accessories or connectors. Ultra-Balancer is the simplest method of keeping your Lipo packs balanced.It can be used for packs up to 14.8 volts (4S). Works as a stand-alone balancer before charging or simultaneously with your charger doing it's balancing function at the same time that your pack is being charged.2.5mm spacing on pin connection allows over 90% of the packs in the market to be used without any adapter required.offer an adapter in the ''Accessories'' category to facilitate the balancing of Thunder Power packs.Connector has 0.100 in pin spacing with 0.025 square pins and fits Apogee and other brands. Pins should be in orderred, black, black and black with no gaps or missing pins in the sequence.Using Your New Balancer Low Voltage Check First connect the Balancer to the Li-ion/Li-Polymer pack. Connect the most negative connection on the battery to the most negative pin on the balancer. If all cells are 3.2 volts or more all LEDs will turn on and remain lit for 5 seconds. If you have a three cell pack the first three LED will turn on. If one cell is low and has less than 3.2 volts that LED will not turn on. This means that your battery pack has been discharged too far. DO NOT CHARGE FAST!! Set your charge rate between 0.1 amps and 0.2 amps a'

Other products from All-Battery.com