AT: Tenergy 7.4V 1150mAh LIPO PCB Protected Battery Pack w/ Bare Leads

Buy It from All-Battery.com

'7.4V 1150mAh Polymer Li-IonPolymer battery packNominal Voltage7.4V Capacity1150mAhMax. Discharging rate:7Amp with PCBOne protective circuit board PCB installed with thebattery packthat limits the discharging current of battery pack to 3Amp. But protect battery from- Over-chargingcut-off8.4V- Over-dischargingcut-off4.6V- Over-drain >6.5Amp - Short circuit and Wrong polarityLight-weighted1.6 oz. Dimension66mm x 34mm x 10mm5'' (127mm) long prewired and shrink wrapped, 26AWG Wires Recommended charger:Universal Li-ion / Li-polymer Smart Charger to charge this battery pack. If you connect two of these modules in parallel, you can build a 7.4V1.75 Ah Battery packwith a 1.7 Amp discharge rate. Applications- HID Bikelight or Dive light - Autonomous submarine - RC Car and RC airplane with greater energy needs - Building external battery packs for Laptop computers or 12V portable devicesCautionImproper use like overcharging and over discharging can cause explosion and/or fire.User of the battery is required tohave sufficient Li-polymer charging experience and technical knowledge. Tenergy or All-Battery.com are NOT responsible for any damage or injury caused by misuse, misunderstanding or abuse of this product.'

Other products from All-Battery.com